The bore of the threadless polyamide insert is a little smaller than the nut’s inner diameter. By the therefore increased friction between nut and shaft the nut is secured against
unscrewing. Attention: do not use above 100°C!
Designation of a self-locking nut with thread d1 = M 30×1,5
Self-locking nut GUK 06 M 30 x 1,5
- Material (Property class) : min. 14 H
- Zinc plated and passivated.
Dimensions in mm
Deliverable in other sizes and with different pitches too.
| Thread d1 | d2 | d3 | h | m | b | t | Nut. | kg/100 | |
|---|---|---|---|---|---|---|---|---|---|
| GUK0 | M 10x0,75 | 18 | 15 | 736 | 4,5 | 3 | 1,5 | 4 | 0,59 |
| GUK1 | M 12x1 | 22 | 18 | 7,6 | 4,5 | 3 | 1,5 | 4 | 0,92 |
| GUK2 | M 15x1 | 24 | 22 | 8,6 | 5,5 | 4 | 1,5 | 4 | 1,36 |
| GUK3 | M 17x1 | 28 | 24 | 8,7 | 5,5 | 4 | 2 | 4 | 1,7 |
| GUK4 | M 20x1 | 32 | 27 | 9,6 | 6,0 | 4 | 2,5 | 4 | 2,3 |
| GUK5 | M 25x1,5 | 38 | 33 | 10,5 | 6,5 | 5 | 2,5 | 4 | 3,44 |
| GUK6 | M 30x1,5 | 44 | 38 | 10,7 | 6,6 | 5 | 3 | 4 | 4,62 |
| GUK7 | M 35x1,5 | 50 | 44 | 11,3 | 7,0 | 5 | 3 | 4 | 5,98 |
| GUK8 | M 40x1,5 | 56 | 50 | 12,3 | 7,7 | 6 | 3 | 4 | 7,5 |
| GUK9 | M 45x1,5 | 62 | 55 | 12,3 | 7,8 | 6 | 3,5 | 4 | 9,3 |
| GUK10 | M 50x1,5 | 68 | 61 | 12,9 | 8,1 | 6 | 3,5 | 4 | 11,3 |
| GUK11 | M 55x2 | 75 | 68 | 13,4 | 8,2 | 7 | 3,5 | 6 | 14,6 |
| GUK12 | M 60x2 | 80 | 73 | 13,4 | 8,2 | 7 | 3,5 | 6 | 15,9 |
| GUK13 | M 65x2 | 85 | 77 | 14,5 | 9 | 7 | 4 | 6 | 19 |
| GUK14 | M 70x2 | 92 | 84 | 14,5 | 9,2 | 8 | 4 | 6 | 22,1 |
| GUK15 | M 75x2 | 98 | 89 | 15,5 | 10 | 8 | 4,5 | 6 | 26,1 |
| GUK16 | M 80x2 | 105 | 96 | 16,5 | 11,2 | 10 | 4 | 8 | 32,1 |
| GUK17 | M 85x2 | 100 | 110 | 17,5 | 12,1 | 10 | 5 | 8 | 37,1 |
| GUK18 | M 90x2 | 120 | 110 | 17,7 | 12,5 | 10 | 5 | 8 | 46,6 |
| GUK19 | M 95x2 | 125 | 115 | 18,7 | 13,5 | 10 | 5 | 8 | 51,6 |
| GUK20 | M 100x2 | 130 | 120 | 19,7 | 14,5 | 10 | 5 | 8 | 59,6 |